ATLAS-1

TABLE MACHINE FOR BAG ON VALVE

Description:

Table Machine able to Crimp/Pressurize and filling the product through the aerosol valve. This machine can be used to fill all type of liquid, edible oil, water, cream for pharmaceutical products, etc.The machine is provided with S/S 304 frame and base, and all the material in contact with the product are S/S 316 made or FDA approved for sealings.

This machine can be positioned on a table to produce in a semiautomatic mode. The operator should manually position the cans under the operating heads, after pressing the START button the machine operates automatically the specific cycle.

The Crimping head can be adjusted for diameter and height very easily in order to respect the customer requirements. The filling circuit can be cleaned by connecting a Clean in Place (CIP) unit.

Technical specifications:
> Real Production: Up to 1.500 cph
> Type of containers: Aerosol cans
> Type of Valves: Bag on Valve (BOV)
> Type of propellant: Compressed air, or N2

Utilities:
> Compressed air 7-8 bar – 1.500 Nl/min.
> Power 700 W.

Configuration:
> N° 1 UTC Station for under the cup pressurization and crimping
> Electric cabinet with PLC
> N° 1 Through the Valve pressure product filling station

Production process

1. Manual positioning of the BOV into the empty can
2. Pressurization of the can and crimping operation
3. Pressure checking of the internal pressure (optional)
4. Product filling through the stem of the Valve
5. Cleaning of the stem (Optional. Usually for post foaming gel)


Actuator placing machine

Non è stato trovato nulla.

MT

Automatic indexing module description:
This is an automatic indexing rotary module suitable to handle rigid containers for aerosol for automatic selection and insertion of actuators on to the cans.

Standard units available on this model:
• Actuator sorter (vibration system)
• Automatic actuator placing unit
• Actuator presence checking unit

The machine body consists of a frame and crankcases made of AISI 304 stainless steel or extruded aluminium. Inside the crankcases there are the indexing electrical motor drive and the pneumatic system, which move the star wheel and the operating units.
It could be features 12-18 position rotating star wheel, that can support cans with a maximum diameter of 66mm. On the baseplate of the machine, there are fixed columns with adjustable supports, on which the operating units are housed.
There are protective transparent panels that surround all the moving parts that may be dangerous to the operators. If a door opens the machine stops.

Available the electronic version equipped by brushless electrical motor and the electric-pneumatic system.

The machine is designed and manufactured to be extremely versatile, as well as extremely reliable and safe. All units comply with the up to dated norms of the European Economical Community (CE mark) and on request are designed to operate in Atex Areas.


Leak Detecting Machine

Non è stato trovato nulla.

TC-16

This is a rotary machine intended for the burst test of rigid containers for aerosols.
The machine body consists of a frame in guarded steel with stainless steel panels AISI304. Inside the guarding, there are the inverter electrical motor and the pneumatic system, which moves the star wheel.

It has a 16 positions, rotating star wheel that thanks a plastic clips, can take cans with a maximum diameter of 66mm and bring them in to the hot water tank. On the table of the machine, there are fixed columns with manual adjustable supports for an easily change of the set up of the machine.

The machine is arranged by an air blow system to dry the can after testing and before they come back to the conveyor chain of the line.
There are transparent doors that surround all of the moving parts that may be dangerous to the operators. If any door is opened by an operator, the machine stops.
The machine is designed and manufactured to be extremely versatile, as well as extremely reliable and safe.


Gel mixing machine

Non è stato trovato nulla.

MIXP-1

This is an automatic module intended for the mixing of the bulk with liquid gas before being filled through the valve (TTV) into rigid containers for aerosol.

Standard units available on this model:
• Bulk metering cylinder
• Liquid gas metering cylinder
• Static mixer

The machine body consists of a frame and crankcases made of AISI 304 stainless steel or extruded aluminium, Inside the guarding, there is the electric-pneumatic system, which move the operating units. There are protective transparent panels that surround all the moving parts that may be dangerous to the operators. If a door opens the machine stops.

The machine is designed and manufactured to be extremely versatile, as well as extremely reliable and safe. All units comply with the up to dated norms of the European Economical Community (CE mark) and are designed to operate in Atex Areas.


TTV Filling product machine

Non è stato trovato nulla.

MPC

Automatic indexing module description:
This is an automatic indexing rotary module suitable to handle rigid containers for aerosol for filling product trough the aerosol valve (TTV) and cleaning operation

Standard units available on this model:
• TTV filling product unit
• Valve cleaning unit

The machine body consists of a frame and crankcases made of AISI 304 stainless steel or extruded aluminium, Inside the guarding, there are the electrical motor and the electric-pneumatic system, which move the star wheel and the operating units.
It could be features 12-20 position rotating star wheel, that can support cans with a maximum diameter of 66mm. On the baseplate of the machine, there are fixed columns with adjustable supports, on which the operating units are housed.
There are protective transparent panels that surround all the moving parts that may be dangerous to the operators. If a door opens the machine stops.

This electronic version is equipped by brushless electrical motor controlled by a PLC. Depending on the model and on the number of the devices installed, machine can run single indexing or multiple indexing.

The machine is designed and manufactured to be extremely versatile, as well as extremely reliable and safe. All units comply with the up to dated norms of the European Economical Community (CE mark) and on request, are designed to operate in Atex Areas.


UTC crimping Machine

MBC

Automatic indexing module description:
This is an automatic indexing rotary module suitable to handle rigid containers for aerosol for the Undercup (UTC) gassing & crimping operation and cheking the pressure in to the can.

Standard units available on this model:
• Automatic inserting BOV unit
• UTC crimping & gassing unit
• Checking pressure unit

The machine body consists of a frame and crankcases made of AISI 304 stainless steel or extruded aluminium, Inside the guarding, there are the electrical motor and the electric-pneumatic system, which move the star wheel and the operating units.
It could be features 12-20 position rotating star wheel, that can support cans with a maximum diameter of 66mm. On the baseplate of the machine, there are fixed columns with adjustable supports, on which the operating units are housed.
There are protective transparent panels that surround all the moving parts that may be dangerous to the operators. If a door opens the machine stops.

This electronic version is equipped by brushless electrical motor controlled by a PLC. Depending on the model and on the number of the devices installed, machine can run single indexing or multiple indexing.

The machine is designed and manufactured to be extremely versatile, as well as extremely reliable and safe. All units comply with the up to dated norms of the European Economical Community (CE mark) and on request, are designed to operate in Atex Areas.

Non è stato trovato nulla.


BOV Filling Machine

Automatic indexing module description:
This is an automatic indexing rotary module suitable to handle rigid containers for aerosol for the Undercup (UTC) gassing & crimping operation, checking the pressure in to the can, for filling product trough the aerosol valve (TTV) and cleaning operation

Standard units available on this model:
• Automatic inserting BOV unit
• UTC crimping & gassing unit
• Checking pressure unit
• TTV filling product unit
• Valve cleaning unit

The machine body consists of a frame and crankcases made of AISI 304 stainless steel or extruded aluminium, Inside the guarding, there are the electrical motor and the electric-pneumatic system, which move the star wheel and the operating units. It could be features 18-24 position rotating star wheel, that can support cans with a maximum diameter of 66mm. On the baseplate of the machine, there are fixed columns with adjustable supports, on which the operating units are housed. There are protective transparent panels that surround all the moving parts that may be dangerous to the operators. If a door opens the machine stops.

This electronic version is equipped by brushless electrical motor controlled by a PLC. Depending on the model and on the number of the devices installed, machine can run single indexing or multiple indexing.

The machine is designed and manufactured to be extremely versatile, as well as extremely reliable and safe. All units comply with the up to dated norms of the European Economical Community (CE mark) and on request, are designed to operate in Atex Areas.


Aerosol gassing machine

MG

Automatic module description: This is an automatic or continuous rotary module suitable to handle rigid containers for aerosol for filling propellant gas trough the aerosol valve (TTV).

Standard units available on this model:
• TTV filling propellant gas unit (LPG, DME, N2, CO2)

The machine body consists of a frame and crankcases made of AISI 304 stainless steel or extruded aluminium. Inside the crankcases there are the (indexing) electrical motor drive and the pneumatic system, which move the star wheel and the operating units. It could be features 12-20 position rotating star wheel, that can support cans with a maximum diameter of 66mm. On the baseplate of the machine, there are fixed columns with adjustable supports, on which the operating units are housed. There are protective transparent panels that surround all the moving parts that may be dangerous to the operators. If a door opens the machine stops.

The machine is designed and manufactured to be extremely versatile, as well as extremely reliable and safe. All units comply with the up to dated norms of the European Economical Community (CE mark) and are designed to operate in Atex Areas.

Non è stato trovato nulla.


Aerosol filling machine

MR | MR-E

Automatic indexing module description: This is an automatic indexing rotary module suitable to handle rigid containers for aerosol for filling product in open cans, automatic selection and insertion of 1” aerosol valves, check the correct insertion of the aerosol valves, vacuum inside the can and crimping of aerosol valve.

Standard units available on this model:
• Filling product unit
• Automatic inserting aerosol valve unit
• Crimping of the aerosol valve unit
• Others special devices available on request.

The machine body consists of a frame and crankcases made of AISI 304 stainless steel or extruded aluminium. Inside the crankcases there are the indexing electrical motor drive and the pneumatic system, which move the star wheel and the operating units. It could be features 12-24 position rotating star wheel, that can support cans with a maximum diameter of 66mm. On the baseplate of the machine, there are fixed columns with adjustable supports, on which the operating units are housed. There are protective transparent panels that surround all the moving parts that may be dangerous to the operators. If a door opens the machine stops.

Available the electronic version equipped by brushless electrical motor and the electric-pneumatic system. Depending on the model and on the number of the devices installed, machine can run single indexing or multiple indexing.

The machine is designed and manufactured to be extremely versatile, as well as extremely reliable and safe. All units comply with the up to dated norms of the European Economical Community (CE mark) and are designed to operate in Atex Areas.

Non è stato trovato nulla.